!
!

XA 175.2

!

SPECIFICATIONS:


  • Rated Power: 110 Watts RMS @ 4 ohm
                                 175 Watts Peak Power 
  • Bridged Power: 350 Watts @ 4 ohm RMS Mono
                                     700 Watts Peak Power
  • Minimum THD at Rated Power: <0.1%
  • Frequency Response: 10Hz – 40KHz
  • S/N Ratio: >97dB
  • Damping Factor: >136@100Hz
  • Channel Separation: >50dB
  • Includes Dashboard Remote Bass Control
  • Dimensions: (W x H x L) 10.4” x 2.3” x 9.7”
FEATURES:

  • High Speed MosFET Power Supply.
  • BiPolar Japanese Sanken Output Devices.
  •  Input Voltage: 200mV - 5 Volts.
  • 12 dB Crossover Circuitry.
  • Bass Boost Equalization.
  • Angled Connection Terminals.
  • Computer Optimized Heatsink Design.
  • 4 ohm Bridgeable, Tri-mode Capable.

XA 125.4

!

PECIFICATIONS:


  • Rated Power: 80 Watts RMS @ 4 ohm
                                 125 Watts Peak Power 
  • Bridged Power: 2 x 250 Watts @ 4 ohm RMS Mono
                                     1000 Watts Peak Power
  • Minimum THD at Rated Power: <0.1%
  • Frequency Response: 10Hz – 40KHz
  • S/N Ratio: >97dB
  • Damping Factor: >198@100Hz
  • Channel Separation: >50dB
  • Dimensions: (W x H x L) 10.4” x 2.3” x 12.6”
FEATURES:

  • High Speed MosFET Power Supply.
  • BiPolar Japanese Sanken Output Devices.
  •  Input Voltage: 200mV - 5 Volts.
  • 12 dB Crossover Circuitry.
  • Bass Boost Equalization.
  • Angled Connection Terminals.
  • Computer Optimized Heatsink Design.
  • 4 ohm Bridgeable, Tri-mode Capable.

XA 175.4

!

SPECIFICATIONS:


  • Rated Power: 110 Watts RMS @ 4 ohm
                                 175 Watts Peak Power 
  • Bridged Power: 2 x 350 Watts @ 4 ohm RMS Mono
                                     1400 Watts Peak Power
  • Minimum THD at Rated Power: <0.1%
  • Frequency Response: 10Hz – 40KHz
  • S/N Ratio: >97dB
  • Damping Factor: >198@100Hz
  • Channel Separation: >50dB
  • Dimensions: (W x H x L) 10.4” x 2.3” x 14.2”
FEATURES:

  • High Speed MosFET Power Supply.
  • BiPolar Japanese Sanken Output Devices.
  •  Input Voltage: 200mV - 5 Volts.
  • 12 dB Crossover Circuitry.
  • Bass Boost Equalization.
  • Angled Connection Terminals.
  • Computer Optimized Heatsink Design.
  • 4 ohm Bridgeable, Tri-mode Capable.

ZRS 7500D

!
HIGH POWER CLASS D MONO BLOCK AMPLIFIER

SPECIFICATIONS:
  • 1 Ohm RMS Power: 1 x 1600 Watts @ 13.8 Volts
  • Peak Power: 1 x 2400 Watts
  • Frequency Response: 10Hz - 400Hz
  • S/N Ratio: >100 db
  • Damping Factor: >200 @ 100Hz
  • Minimum THD: <0.03%
  • Input Voltage: 200 mV - 8 Volts
  • Dimensions: 16" x 9.4" x 2.4"

FEATURES:

  • High Speed Mosfet Power Supply
  • Bi-Polar Japanese Sanken Output Devices
  • Copper Rail PCB Architecture
  • 24 dB Crossover Circuitry
  • Fully Adjustable Low Pass Crossover
  • Low Pass Crossover: 50Hz - 150Hz
  • Bass Boost Equalization: 0-18db @ 45Hz
  • Subsonic Filter: 15Hz - 40Hz
  • Lucite Encapsulated Large 2 Gauge Terminals
  • Soft Start Mute & Delay
  • Dual-Amp Bridging for Double the Power @ 2 Ohms
  • Master/Slave Control
  • Adjustable Phase Control
  • RCA Line-In/Line-Out Jacks
  • Includes Dash Board Bass Remote
  • 2 Year Warranty

ZRS 9004

!

SPECIFICATIONS:
  • 4 Ohm RMS Power: 4 x 90 Watts @ 13.8 Volts
  • 2 Ohm RMS Power: 4 x 125 Watts @ 13.8 Volts
  • 4 Ohm Bridged RMS Power: 2 x 250 Watts @ 13.8 Volts
  • Frequency Response: 10Hz - 40KHz
  • Channel Seperation: >65 dB
  • S/N Ratio: >100 db
  • Damping Factor: >200 @ 100Hz
  • Minimum THD: <0.01%
  • Input Voltage: 200 mV - 8 Volts
  • Dimensions: 15" x 9.25" x 2.5"

FEATURES:

  • High Speed Mosfet Power Supply
  • Bi-Polar Japanese Sanken Output Devices
  • Copper Rail PCB Architecture
  • 24 dB Crossover Circuitry
  • Fully Adjustable Low/High Pass Crossover
  • High Pass Crossover: 50Hz - 500Hz
  • Low Pass Crossover: 50Hz - 150Hz
  • Bass Boost Equalization: 0-18db @ 45Hz
  • Lucite Encapsulated Large 8 Gauge Terminals
  • Soft Start Mute & Delay
  • Adjustable Phase Control
  • 2 Year Warranty

ZRS 5000M

!
SPECIFICATIONS:
  • 2 Ohm RMS Power: 1 x 450 Watts @ 13.8 Volts
  • 4 Ohm RMS Power: 1 x 250 Watts @ 13.8 Volts
  • Peak Power: 1 x 900 Watts
  • Frequency Response: 10Hz - 500Hz
  • S/N Ratio: >100 db
  • Damping Factor: >250 @ 100Hz
  • Minimum THD: <0.01%
  • Input Voltage: 200 mV - 8 Volts
  • Dimensions: 9.25" x 2.5" x 18.5"

FEATURES:

  • High Speed Mosfet Power Supply
  • Bi-Polar Japanese Sanken Output Devices
  • Copper Rail PCB Architecture
  • 24 dB Crossover Circuitry
  • Fully Adjustable Low Pass Crossover
  • Low Pass Crossover: 50Hz - 150Hz
  • Bass Boost Equalization: 0-18db @ 45Hz
  • Subsonic Filter: 15Hz - 40Hz
  • Lucite Encapsulated Large 4 Gauge Terminals
  • Soft Start Mute & Delay
  • Dual-Amp Bridging for Double the Power @ 4 Ohms
  • Master/Slave Control
  • Adjustable Phase Control
  • RCA Line-In/Line-Out Jacks
  • Includes Dash Board Bass Remote
  • 2 Year Warranty

ZRS 6000D

!
SPECIFICATIONS:
  • 2 Ohm RMS Power: 1 x 700 Watts @ 13.8 Volts
  • Peak Power: 1 x 1400 Watts
  • Frequency Response: 10Hz - 400Hz
  • S/N Ratio: >100 db
  • Damping Factor: >200 @ 100Hz
  • Minimum THD: <0.03%
  • Input Voltage: 200 mV - 8 Volts
  • Dimensions: 9.8" x 9.4" x 2.4"

FEATURES:

  • High Speed Mosfet Power Supply
  • Bi-Polar Japanese Sanken Output Devices
  • Copper Rail PCB Architecture
  • 24 dB Crossover Circuitry
  • Fully Adjustable Low Pass Crossover
  • Low Pass Crossover: 50Hz - 150Hz
  • Bass Boost Equalization: 0-18db @ 45Hz
  • Subsonic Filter: 15Hz - 40Hz
  • Lucite Encapsulated Large 4 Gauge Terminals
  • Soft Start Mute & Delay
  • Dual-Amp Bridging for Double the Power @ 4 Ohms
  • Master/Slave Control
  • Adjustable Phase Control
  • RCA Line-In/Line-Out Jacks
  • Includes Dash Board Bass Remote
  • 2 Year Warranty